M156 Phaser Repair Street
M156 Phaser Repair Street
Rebuild Bank (One Bank Side) $350.00
Inventory Status: In stock. Ships within 3 Days
Includes:
Intake Lockplate x1
Exhaust Lockplate x1
This product will rebuild the camshaft adjusters on one bank of the M156/M159 and does not carry any warranty. This set includes two replacement springs and two pins. The oil fill angle of the keyhole has been optimized from stock.
Rebuild Kit (Both Banks) $699.99
Inventory Status: In stock. Ships within 3 Days
Includes:
Intake Lockplates x2
Exhaust Lockplates x2
Pins and springs x4 of each
The set replaces worn Lockplates from the camshaft adjusters in both banks.
Twice stronger than stock. Direct replacement to your stock M156 Camshaft Adjusters Lockplates. Springs are modified to compress less than early model and compress more than late model revisions. Rebuilds Item 120 and 125 in the exploded view. All repair variants keyhole oil fill angle has been optimized from stock and maintains oil flow avoiding detrimental cavitation.
Complete w/ Skeleton Covers (Both Banks) $900.00
Inventory Status: In stock. Ships within 3 Days
Includes:
Everything in the M156 Stage I+ Lockplates Full Kit
PLUS Skeleton Covers x4
The added covers replaces all four cam adjuster/phaser covers due to damage, out-of-tolerance or as a precautionary upgrade, fully strengthened and lightened covers. The full on intensive and intricate parts rebuild of stock M156 adjuster components offer weight reduction to the extreme when paired with 20 piece Titanium Hardware. Titanium bolts are guaranteed to fit these lightened Skeleton Covers. Improved throttle response and oil retention properties creates extremely accurate phasing events of the variable valve system.
Carries a non-transferrable up to 2 Year Limited Warranty when installed by a qualified dealer. See FAQ for details. See homepage for list of authorized dealers.
Non “+” older model are shown in photos. Shown in photos are no longer representative of true product
Locating Device / Timing Tool is required to perform cylinder head work, MB Part no. Gaskets and Washers are one time use and need to be replaced. Timing Tool Kit part no. W156589006100. Ensure you have a mechanic that is qualified to inspect the surrounding components and engine parts touched and replace worn components as needed or major damage, breakage of parts, hardware, or injury can occur.
Prices in USD
YOU ARE ALSO REQUIRED TO REPLACE
Valvetrain Gaskets (Prevents Leaks on Old Gaskets and replace Friction Washer which is One-Time Use)
Camshaft Bolts ARP or Titanium (Replaces One-Time Use Bolts)
Adjuster Bolts Titanium (Replaces One-Time Use Bolts)
THE FOLLOWING ARE RECOMMENDED
M156 Phaser Repair Street
M156 Phaser Repair Street
Rebuild Bank (One Bank Side) $350.00
Inventory Status: In stock. Ships within 3 Days
Includes:
Intake Lockplate x1
Exhaust Lockplate x1
This product will rebuild the camshaft adjusters on one bank of the M156/M159 and does not carry any warranty. This set includes two replacement springs and two pins. The oil fill angle of the keyhole has been optimized from stock.
Rebuild Kit (Both Banks) $699.99
Inventory Status: In stock. Ships within 3 Days
Includes:
Intake Lockplates x2
Exhaust Lockplates x2
Pins and springs x4 of each
The set replaces worn Lockplates from the camshaft adjusters in both banks.
Twice stronger than stock. Direct replacement to your stock M156 Camshaft Adjusters Lockplates. Springs are modified to compress less than early model and compress more than late model revisions. Rebuilds Item 120 and 125 in the exploded view. All repair variants keyhole oil fill angle has been optimized from stock and maintains oil flow avoiding detrimental cavitation.
Complete w/ Skeleton Covers (Both Banks) $900.00
Inventory Status: In stock. Ships within 3 Days
Includes:
Everything in the M156 Stage I+ Lockplates Full Kit
PLUS Skeleton Covers x4
The added covers replaces all four cam adjuster/phaser covers due to damage, out-of-tolerance or as a precautionary upgrade, fully strengthened and lightened covers. The full on intensive and intricate parts rebuild of stock M156 adjuster components offer weight reduction to the extreme when paired with 20 piece Titanium Hardware. Titanium bolts are guaranteed to fit these lightened Skeleton Covers. Improved throttle response and oil retention properties creates extremely accurate phasing events of the variable valve system.
Carries a non-transferrable up to 2 Year Limited Warranty when installed by a qualified dealer. See FAQ for details. See homepage for list of authorized dealers.
Non “+” older model are shown in photos. Shown in photos are no longer representative of true product
Locating Device / Timing Tool is required to perform cylinder head work, MB Part no. Gaskets and Washers are one time use and need to be replaced. Timing Tool Kit part no. W156589006100. Ensure you have a mechanic that is qualified to inspect the surrounding components and engine parts touched and replace worn components as needed or major damage, breakage of parts, hardware, or injury can occur.
Prices in USD
YOU ARE ALSO REQUIRED TO REPLACE
Valvetrain Gaskets (Prevents Leaks on Old Gaskets and replace Friction Washer which is One-Time Use)
Camshaft Bolts ARP or Titanium (Replaces One-Time Use Bolts)
Adjuster Bolts Titanium (Replaces One-Time Use Bolts)